Wegen Server-Umzug ist das Wiki im Moment im Nur-Lesen-Modus.




Übersetzungen dieser Seite?:




  Driven by DokuWiki
talk:parts:74_16646  de:parts:74_16646

74_16646 - Transceiver


74FCT162646: FAST CMOS 16-BIT Registered Transceiver (3-STATE)

The IDT54/74FCT16646T/AT/CT/ET and IDT54/74FCT162646T/AT/CT/ET 16-bit registered transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power devices are organized as two independent 8-bit bus transceivers with 3-state D-type registers. The control circuitry is organized for multiplexed transmission of data between A bus and B bus either directly or from the internal storage registers. Each 8-bit transceiver/register features direction control (xDIR), over-riding Output Enable control (xOE) and Select lines (xSAB and xSBA) to select either real-time data or stored data. Separate clock inputs are provided for A and B port registers. Data on the A or B data bus, or both, can be stored in the internal registers by the LOW-to-HIGH transitions at the appropriate clock pins. Flowthrough organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin.

A4T: 74FCT16646TPV

The IDT54/74FCT16646T/AT/CT/ET are ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow „live insertion“ of boards when used as backplane drivers.

The IDT54/74FCT162646T/AT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times–reducing the need for external series terminating resistors. The IDT54/74FCT162646T/AT/CT/ET are plug-in replacements for the IDT54/74FCT16646T/AT/CT/ET and 54/74ABT16646 for on-board bus interface applications.

Pinbelegung / Pinout



im Amiga

TypCommo-Nr. C= Bezeichnung C= Info Form Editors Info
A 391669-0174FCT16646 (SO56) SO-56

VorkommenAnzahlTypPosition Bemerkung
A4000T 2 A U706, U707,TPV

Hergestellt in den Jahren .. bis .. in .. bekannten Revision.
Hersteller-Aufdruck: +Date-Code

bisher von 'Firma/en' gesehen 'Bezeichnung' (+Bauform)


· Zuletzt geändert: 2013/03/24 05:19 (Externe Bearbeitung)